Kunshan Core IOT introduction: What are the matters needing attention when using palletizer? 

 1, in the operation or waiting of the palletizer, can not enter the operation range of the palletizer, especially when the gripper moves in the vertical direction, do not walk under the gripper. 

 2. When the operator runs the palletizer manually or automatically, it is necessary to confirm that there are no idle personnel near the palletizer. Palletizer remote control should be operated by specialized personnel, irrelevant personnel can not operate at will. 

 3. When it is necessary to check the parts under the palletizer and enter the working range of the palletizer, the operator needs to confirm that the emergency stop button of the equipment has been pressed. 4. Before starting or starting the equipment, it is necessary to confirm the safety conditions and remove the obstructions within the movement range of the palletizer. Remember not to try to block the palletizer with your body or tools, yes To stop the device immediately, press the "Emergency Stop" button. 5. Set warning signs in the conspicuous position of the equipment to remind people of falling objects and possible loss of life and property caused by the operation of the equipment. 6, the palletizer horizontal and vertical direction of the servo motor, the gripper front end of the high precision sensor, as well as the vertical track side set of the sensor and the bottom guided linear guide rail, the operator in the Protective measures should be taken during use to prevent the above precision parts from being impacted or damaged. 7, do not stand on the palletizer fork and control the operation of the palletizer 8. The chain and guide rail of the palletifier need regular refueling, and can be coated with grease. The loss of lubricating oil is faster than that of lubricating oil, if insufficient lubrication is easy to cause abnormal wear of linear slide rail to reduce its life.